C613-50057-01 REV A
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
995
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Q
O
S C
OMMANDS
STORM
-
ACTION
storm-action
Overview
Sets the action to be taken when triggered by QoS Storm Protection (QSP). There
are three available options:
•
portdisable
will disable the port in software.
•
vlandisable
will disable the port from the VLAN matched by the class-map
in class-map.
•
linkdown
will physically bring the port down. The
vlandisable
requires the
match vlan class-map to be present in the class-map.
The
no
variant of this command will negate the action set by the
storm-action
command.
Syntax
storm-action {portdisable|vlandisable|linkdown}
no storm-action
Mode
Policy Map Class Configuration
Examples
To apply the storm protection of
vlandisable
to the policy-map named
pmap2
, and the class-map named
cmap1
, use the following commands:
awplus#
configure terminal
awplus(config)#
policy-map pmap2
awplus(config-pmap)#
class cmap1
awplus(config-pmap-c#
storm-action vlandisable
To negate the storm protection set on the policy-map named
pmap2
, and the
class-map named
cmap1
, use the following commands:
awplus#
configure terminal
awplus(config)#
policy-map pmap2
awplus(config-pmap)#
class cmap1
awplus(config-pmap-c#
no storm-action
Related
Commands
storm-downtime
storm-protection
storm-rate
storm-window
Parameter
Description
portdisable
Disable the port in software.
vlandisable
Disable the VLAN.
linkdown
Shutdown the port physically.
