C613-50057-01 REV A
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
559
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
L
INK
A
GGREGATION
C
OMMANDS
SHOW
STATIC
-
CHANNEL
-
GROUP
show static-channel-group
Overview
Use this command to display all configured static channel groups and their
corresponding member ports. Note that a static channel group is the same as a
static aggregator.
The command output also shows the thrash limiting status. If thrash limiting is
detected and the
thrash limiting
parameter of the
thrash-limiting
command is set
to
vlan disable
, the output will also show the VLANs on which thrashing is
detected.
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the
“Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide
.
Syntax
show static-channel-group
Mode
User Exec and Privileged Exec
Example
awplus#
show static-channel-group
Output
Figure 13-9:
Example output from the
show static-channel-group
command
Related
Commands
static-channel-group
% LAG Maximum : 128
% LAG Static Maximum: 96
% LAG Dynamic Maximum: 32
% LAG Static Count : 2
% LAG Dynamic Count : 2
% LAG Total Count : 4
% Static Aggregator: sa2
% Member:
port1.0.1
% Static Aggregator: sa3
% Member:
port1.0.2
