1728
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C613-50057-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
LLDP C
OMMANDS
SHOW
LLDP
show lldp
Overview
This command displays LLDP status and global configuration settings.
Syntax
show lldp
Mode
User Exec and Privileged Exec
Example
To display LLDP status and global configuration settings, use the command:
awplus#
show lldp
Output
Table 42-2: Example output from the
show lldp
command
awplus# show lldp
LLDP Global Configuration: [Default Values]
LLDP Status ............... Enabled [Disabled]
Notification Interval ..... 5 secs [5]
Tx Timer Interval ......... 30 secs [30]
Hold-time Multiplier ...... 4 [4]
(Computed TTL value ....... 120 secs)
Reinitialization Delay .... 2 secs [2]
Tx Delay .................. 2 secs [2]
Port Number Type........... Ifindex [Port-Number]
Fast Start Count .......... 5 [3]
LLDP Global Status:
Total Neighbor Count ...... 47
Neighbors table last updated 0 hrs 0 mins 43 secs ago
Table 42-3: Parameters in the output of the
show lldp
command
Parameter
Description
LLDP Status
Whether LLDP is enabled. Default is disabled.
Notification
Interval
Minimum interval between LLDP notifications.
Tx Timer
Interval
Transmit interval between regular transmissions of LLDP
advertisements.
Hold-time
Multiplier
The holdtime multiplier. The transmit interval is multiplied
by the holdtime multiplier to give the Time To Live (TTL)
value that is advertised to neighbors.
Reinitialization
Delay
The reinitialization delay. This is the minimum time after
disabling LLDP transmit on a port before it can reinitialize
again.
