1880
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C613-50057-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
S
TACKING
C
OMMANDS
SHOW
STACK
RESILIENCYLINK
show stack resiliencylink
Overview
Use this command to display information about the current status of the
resiliency-link across the members of the stack.
Syntax
show stack resiliencylink
Mode
User Exec and Privileged Exec
Example
To display information about the current status of the resiliency-link across the
stack members, use the command:
awplus#
show stack resiliencylink
Output
Figure 49-6:
Example output from the
show stack resiliencylink
command
awplus(config)# show stack resiliencylink
Stack member 1:
-----------------------------------------------------------
Status Configured
Interface vlan4093
Interface state UP
Resiliency-link port(s) port1.2.11
Stack member 2:
-----------------------------------------------------------
Status Successful
Interface vlan4093
Interface state UP
Resiliency-link port(s) port2.2.11
Table 49-6: Parameters in the output of the
show stack resiliencylink
command
Parameter
Description
Status
The current status of the stack member’s resiliency link. Can
be one of:
•
Not configured
(Master or Member).
•
Configured
(Master only).
•
Successful
:
Successfully receiving healthchecks from the Active Master.
•
Failed
(Member only):
Not receiving any healthchecks from the Active Master.
•
Stopped
:
The resiliency link is configured, but is inactive. This may
occur in a Disabled Master stack, for example if the
Disabled Master Monitoring feature is not used.
Interface
The name of the VLAN interface that is connected to the
resiliency link.
