1466
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C613-50057-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
AMF C
OMMANDS
DEBUG
ATMF
PACKET
debug atmf packet
Overview
This command configures AMF Packet debugging parameters. The debug only
displays information relevant to the current node. The command has following
parameters:
Syntax
debug atmf packet[[direction {rx|tx|both}][level
{1|2|3}][timeout <
seconds
>][num-pkts <
quantity
>][filter node
<
name
> [interface <
ifname
>][pkt-type
{[1][2][3][4][5][6][7][8][9][10][11][12][13]]]
Simplified
Syntax
NOTE
:
You can combine the syntax components shown, but when doing so, you must
retain their original order.
Default
Level 1, both Tx and Rx, a timeout of 60 seconds with no filters applied.
NOTE
:
An alias to the
no
variant of this command -
undebug atmf
- can be found
elsewhere in this chapter.
Mode
User Exec and Global Configuration
Usage
If no additional parameters are specified, then the command output will apply a
default selection of parameters shown below:
debug atmf packet
[direction {rx|tx|both}]
[level {[1][2|3}]
[timeout <
seconds
>]
[num-pkts <
quantity
>]
debug atmf packet
filter
[node <
name
>]
[interface <
ifname
>]
[pkt-type
[1][2][3][4][5][6][7][8][9][10][11][12][13]]
Parameter
Description
direction
Sets debug to packet received, transmitted, or both
rx
packets received by this node
tx
Packets sent from this node
1
AMF Packet Control header Information, Packet Sequence
Number. Enter 1 to select this level.
2
AMF Detailed Packet Information. Enter 2 to select this level.
3
AMF Packet HEX dump. Enter 3 to select this level.
