1638
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C613-50057-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
DHCP
FOR
IP
V
6 (DHCP
V
6) C
OMMANDS
SHOW
COUNTER
IPV
6
DHCP
-
CLIENT
show counter ipv6 dhcp-client
Overview
Use this command in User Exec or Privilege Exec mode to show DHCPv6 client
counter information. See
show counter ipv6 dhcp-server
for DHCPv6 server
information.
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the
“Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide
.
Syntax
show counter ipv6 dhcp-client
Mode
User Exec and Privileged Exec
Example
To display the DHCPv6 client counter information, use the command:
awplus#
show counter ipv6 dhcp-client
Output
Figure 40-2:
Example output from the
show counter ipv6 dhcp-client
command
awplus#show counter ipv6 dhcp-client
SOLICIT out ......... 20
ADVERTISE in ......... 12
REQUEST out ......... 1
CONFIRM out ......... 0
RENEW out ......... 0
REBIND out ......... 0
REPLY in ......... 0
RELEASE out ......... 0
DECLINE out ......... 0
INFORMATION-REQUEST out ......... 0
Table 40-1: Parameters in the output of the
show counter ipv6 dhcp-client
command
Parameter
Description
SOLICIT out
Displays the count of SOLICIT messages sent by the DHCPv6
client.
ADVERTISE in
Displays the count of ADVERTISE messages received by the
DHCPv6 client.
REQUEST out
Displays the count of REQUEST messages sent by the DHCPv6
client.
CONFIRM out
Displays the count of CONFIRM messages sent by the DHCPv6
client.
RENEW out
Displays the count of RENEW messages sent by the DHCPv6
client.
