1484
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C613-50057-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
AMF C
OMMANDS
SHOW
ATMF
BACKUP
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the
“Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide
.
Related
Commands
show atmf
atmf network-name
Backup Media
The current backup medium in use. This will be one of USB, SD, or NONE. Note that
the USB will take precedence over the SD card. Utilized and available memory (MB)
will be indicated if backup media memory is present.
Current Action
The task that the AMF backup mechanism is currently performing. This will be a
combination of either (Idle, Starting, Doing, Stopping), or (manual, scheduled).
Started
The date and time that the currently executing task was initiated in the format DD
MMM YYYY.
Current Node
The name of the node that is currently being backed up.
Node Name
The name of the node that is storing backup data - on its backup media.
Date
The data of the last backup in the format DD MMM YYYY.
Time
The time of the last backup in the format HH:MM:SS.
In ATMF
Whether the node shown is active in the AMF network, (Yes or No).
Status
The output can contain one of four values:
•
“-” meaning that the status file cannot be found or cannot be read.
•
“Errors” meaning that there are issues - note that the backup may still be deemed
successful depending on the errors.
•
“Stopped” meaning that the backup attempt was manually aborted;.
•
“Good” meaning that the backup was completed successfully.
Log File
Location
All backup attempts will generate a result log file in the identified directory based on
the node name. In the above example this would be:
card:/amf/office/logs/rsync_amf_testbox1.log.
Log Details
The contents of the backup log file.
server-status
Displays connectivity diagnostics information for each configured remove file server.
Table 37-14: Parameter definitions from the
show atmf backup server-status
command (cont.)
Parameter
Definition
