1420
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C613-50057-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
AMF C
OMMANDS
ATMF
CONTROLLER
atmf controller
Overview
Use this command to configure the device as an AMF controller. This enables you
to split a large AMF network into multiple areas.
The number of areas supported on a controller depends on the license installed on
that controller.
Syntax
atmf controller
no atmf controller
Mode
Global configuration
Usage
A valid AMF license must be available before this command can be applied.
Example
To configure the node named
controller-1
as an AMF controller, use the
commands:
controller-1#
configure terminal
controller-1(config)#
atmf controller
To stop the node named
controller-1
from being an AMF controller, use the
commands:
controller-1#
configure terminal
controller-1(config)#
no atmf controller
Related
Commands
atmf area
show atmf
