334
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C613-50057-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
I
NTERFACE
C
OMMANDS
SHOW
INTERFACE
show interface
Overview
Use this command to display interface configuration and status.
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the
“Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide
.
Syntax
show interface [
<interface-list
>]
show interface lo
Mode
User Exec and Privileged Exec
Usage
Note that the output displayed with this command will show MTU (Maximum
Transmission Unit) size for VLAN interfaces, and MRU (Maximum Received Unit)
size for switch ports.
Example
To display configuration and status information for all interfaces, use the
command:
awplus#
show interface
Parameter
Description
<
interface-list
>
The interfaces or ports to configure. An interface-list can be:
•
an interface such as a VLAN (e.g.
vlan2
), a switch port (e.g.
port1.0.6
), a static channel group (e.g.
sa2
) or a
dynamic (LACP) channel group (e.g.
po2
)
•
•
a continuous range of interfaces, ports, static channel
groups or dynamic (LACP) channel groups separated by a
hyphen; e.g.
vlan2-8
, or
port1.0.1-1.0.6
, or
sa1-2
,
or
po1-2
•
a comma-separated list of the above; e.g.
port1.0.1,port1.0.4-1.0.6
. Do not mix interface
types in a list
The specified interfaces must exist.
lo
The local loopback interface.
