150
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C613-50057-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
F
ILE
M
ANAGEMENT
C
OMMANDS
SHOW
AUTOBOOT
show autoboot
Overview
This command displays the Autoboot configuration and status.
Syntax
show autoboot
Mode
Privileged Exec
Example
To show the Autoboot configuration and status, use the command:
awplus#
show autoboot
Output
Figure 3-5:
Example output from the
show autoboot
command
Figure 3-6:
Example output from the
show autoboot
command when an
external media source is not present
Related
Commands
autoboot enable
create autoboot
show boot
awplus#show autoboot
Autoboot configuration
--------------------------------------------------------------------------------
Autoboot status : enabled
USB file autoboot.txt exists : yes
Restore information on USB
Autoboot enable in autoboot.txt : yes
Restore release file :
IX5-5.4.5-0.1.rel
(file exists)
Restore configuration file : network_1.cfg (file exists)
awplus#show autoboot
Autoboot configuration
--------------------------------------------------------------------------------
Autoboot status : enabled
External media source : USB not found.