1140
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C613-50057-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
AAA C
OMMANDS
AAA
ACCOUNTING
AUTH
-
WEB
DEFAULT
aaa accounting auth-web default
Overview
This command configures a default accounting method list for Web-based Port
Authentication. The default accounting method list specifies what type of
accounting messages are sent and specifies which RADIUS Servers the accounting
messages are sent to. The default accounting method list is automatically applied
to interfaces with Web-based Authentication enabled.
Use the
no
variant of this command to disable AAA accounting for Web-based Port
Authentication globally.
Syntax
aaa accounting auth-web default {start-stop|stop-only|none}
group {<
group-name
>|radius}
no aaa accounting auth-web default
Default
RADIUS accounting for Web-based Port Authentication is disabled by default.
Mode
Global Configuration
Usage
There are two ways to define servers where RADIUS accounting messages are sent:
•
group radius
: use all RADIUS servers configured by
radius-server host
command
•
group <
group-name>
: use the specified RADIUS server group configured
with the
aaa group server
command
Configure the accounting event to be sent to the RADIUS server with the following
options:
•
start-stop
: sends a
start
accounting message at the beginning of a session
and a
stop
accounting message at the end of the session.
•
stop-only
: sends a
stop
accounting message at the end of a session.
•
none
: disables accounting.
Examples
To enable RADIUS accounting for Web-based Authentication, and use all available
RADIUS Servers, use the commands:
awplus#
configure terminal
awplus(config)#
aaa accounting auth-web default start-stop
group radius
Parameter
Description
start-stop
Start and stop records to be sent.
stop-only
Stop records to be sent.
none
No accounting record to be sent.
<
group-name
>
Server group name.
radius
Use all RADIUS servers.
