C613-50057-01 REV A
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
375
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
S
WITCHING
C
OMMANDS
PLATFORM
LOAD
-
BALANCING
platform load-balancing
Overview
This command selects which address fields are used as inputs into the load
balancing algorithm for aggregated links. The output from this algorithm is used
to select which individual path a given packet will traverse within an aggregated
link.
The
no
variant of this command applies its default setting.
Syntax
platform load-balancing {src-dst-mac|src-dst-ip}
no platform load-balancing
Default
The default is
src-dst-ip
.
Mode
Global configuration
Examples
To set the load balancing algorithm to include only Layer 2 MAC addresses, enter:
awplus#
configure terminal
awplus(config)#
platform load-balancing src-dst-mac
To set the load balancing algorithm to include only Layer 3 IP addresses and L4
ports, enter:
awplus#
configure terminal
awplus(config)#
platform load-balancing src-dst-ip
Related
Commands
show platform
Parameter
Description
src-dst-mac
Include the source and destination MAC addresses (Layer 2)
src-dst-ip
Include the source and destination IP addresses (Layer 3).
Include the source and destination IP addresses (Layer 3) and
UDP/TCP source and destination ports.
If you choose this option, the algorithm will use MAC addresses
to calculate load balancing for Layer 2 and non-IP packets.
