C613-50057-01 REV A
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
1029
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
802.1X C
OMMANDS
SHOW
DOT
1
X
STATISTICS
INTERFACE
show dot1x statistics interface
Overview
This command shows the authentication statistics for the specified interface,
which may be a static channel (or static aggregator) or a dynamic (or LACP)
channel group or a switch port.
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the
“Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide
.
Syntax
show dot1x statistics interface <
interface-list
>
Mode
Privileged Exec
Example
See sample output below showing 802.1X authentication statistics for
port1.0.6
:
awplus#
show dot1x statistics interface port1.0.6
Parameter
Description
<interface-list>
The interfaces or ports to configure. An interface-list can be:
•
an interface (e.g.
vlan2
), a switch port (e.g.
port1.0.6
),
a static channel group (e.g.
sa2
) or a dynamic (LACP)
channel group (e.g.
po2
)
•
a continuous range of interfaces, ports, static channel
groups or dynamic (LACP) channel groups separated by a
hyphen; e.g.
vlan2-8
, or
port1.0.1-1.0.4
, or
sa1-2
,
or
po1-2
•
a comma-separated list of the above; e.g.
port1.0.1,port1.0.4-1.0.6
. Do not mix interface
types in a list
The specified interfaces must exist.
802.1X statistics for interface port1.0.6
EAPOL Frames Rx: 5 - EAPOL Frames Tx: 16
EAPOL Start Frames Rx: 0 - EAPOL Logoff Frames Rx: 0
EAP Rsp/Id Frames Rx: 3 - EAP Response Frames Rx: 2
EAP Req/Id Frames Tx: 8 - EAP Request Frames Tx: 2
Invalid EAPOL Frames Rx: 0 - EAP Length Error Frames Rx: 0
EAPOL Last Frame Version Rx: 1 - EAPOL Last Frame
Src:00d0.59ab.7037
