1500
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C613-50057-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
AMF C
OMMANDS
SHOW
ATMF
LINKS
DETAIL
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the
“Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide
.
Node Transaction
List
List of transactions from this downlink domain node.
•
Node - 0 links are not blocked to the domain. 1 All links are blocked to the
domain.
•
Transaction ID - Transaction id for this node.
•
Domain List: Shows list of nodes in the current domain and their links to the
downlink domain.:
•
Domain - Domain name of the downlink node.
•
Node - Name of the node in the current domain.
•
Ifindex - Interface index for the link from the node to the downlink domain.
•
Transaction ID - Transaction id of the node in the current domain.
•
Flags - As mentioned above.
Up/Downlink Ports
Information
Shows all the configured up and down link ports on this node:
•
Port - Name of the local port.
•
Ifindex - Interface index of the local port.
•
VR ID - Virtual router id for the local port.
•
Port Status - Shows status of the local port on the Node as UP/DOWN.
•
Port State - AMF state of the local port.
•
Adjacent Node - nodename of the adjacent node.
•
Adjacent Internal ID - Unique node identifier of the remote node.
•
Adjacent Ifindex - Interface index for the port of adjacent AMF node.
•
Adjacent Board ID - Product identifier for the adjacent node.
•
Adjacent VR ID - Virtual router id for the port on adjacent AMF node.
•
Adjacent MAC - MAC address for the port on adjacent AMF node.
•
Adjacent Domain Controller - nodename of the Domain controller for
Adjacent AMF node.
•
Adjacent Domain Controller MAC - MAC address of the Domain controller for
Adjacent AMF node.
•
Port Forwarding State - Local port forwarding state Forwarding or Blocking.
•
Port BPDU Receive Count - count of AMF protocol PDU's received.
•
Port Sequence Number - hello sequence number, incremented every time
the data in the hello packet changes.
•
Port Adjacent Sequence Number - remote ends sequence number used to
check if we need to process this packet or just note it arrived.
•
Port Last Message Response - response from the remote neighbor to our last
hello packet.
Table 37-22: Parameter definitions from the
show atmf links detail
command output (cont.)
Parameter
Definition
