212
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C613-50057-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
S
YSTEM
C
ONFIGURATION
AND
M
ONITORING
C
OMMANDS
FINDME
To activate the Find Me feature for the default duration (60 seconds) on switch port
interfaces
port1.0.2
through
port1.0.4
, use the following command:
awplus#
findme interface port1.0.2-1.0.4
In the example above, ports 2 to 4 will flash 4 times and then all ports will flash
twice. Each alternate flash will be amber (if that device has amber LEDs). This
pattern will repeat until
timeout
(default or set) or
no
findme
commands are used.
To deactivate the Find Me feature, use the following command:
awplus#
no findme
To activate the Find Me feature for the default duration on stack member 2, use the
following command:
awplus#
findme member 2
In the example above, all ports on member 2 will flash 4 times and then all ports in
the stack will flash twice. Each alternate flash will be amber (if that device has
amber LEDs). This pattern will repeat until the
timeout
(default or set) expires or
the
no
findme
commands is used.
