C613-50057-01 REV A
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
229
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
S
YSTEM
C
ONFIGURATION
AND
M
ONITORING
C
OMMANDS
SHOW
DEBUGGING
show debugging
Overview
This command displays information for all debugging options.
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the
“Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide
.
Syntax
show debugging
Default
This command runs all the
show debugging
commands in alphabetical order.
Mode
User Exec and Privileged Exec
Usage
This command displays all debugging information, similar to the way the
show
tech-support
command displays all show output for use by Allied Telesis
authorized service personnel only.
Example
To display all debugging information, use the command:
awplus#
show debugging
Output
Figure 5-5:
Example output from the
show debugging
command
awplus#show debugging
AAA debugging status:
Authentication debugging is off
Accounting debugging is off
% DHCP Snooping service is disabled
802.1X debugging status:
EPSR debugging status:
EPSR Info debugging is off
EPSR Message debugging is off
EPSR Packet debugging is off
EPSR State debugging is off
IGMP Debugging status:
IGMP Decoder debugging is off
IGMP Encoder debugging is off
...
