C613-50057-01 REV A
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
1461
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
AMF C
OMMANDS
ATMF
WORKING
-
SET
atmf working-set
Overview
The AMF working-set command enables you to execute commands across an
individually listed set (or preselected group) of AMF nodes. Group selection is
made using the
atmf group (membership)
command.
This command opens a session on multiple network devices. When you change the
working set to anything other than the local device, the prompt will change to the
AMF network name, followed by the size of the working set, shown in square
brackets. This command has to be run at privilege level 15.
In addition to the user defined groups, the following system assigned groups are
automatically created:
•
Implicit Groups
–
local: The originating node.
–
current: All nodes that comprise the current working-set
–
all: All nodes in the AMF
•
Automatic Groups - These can be defined by hardware architecture, e.g.
x510, x610, x8100, AR3050S or AR4050S, or by certain AMF nodal
designations such as master.
Note that the Implicit Groups do not appear in show group output.
If a node is an AMF master it will be automatically added to the master group.
Syntax
atmf working-set
{[
<node-list>
][group{
<group-list>
|all|local|current}]}
Default
Needs to be entered
Mode
Privileged Exec
Parameter
Description
<node-list>
A comma delimited list (without spaces) of nodes to be included
in the working-set.
group
The AMF group.
<group-list>
A comma delimited list (without spaces) of groups to be included
in the working-set. Note that this can include either defined
groups, or any of the Automatic, or Implicit Groups shown earlier
in the bulleted list of groups.
all
All nodes in the AMF.
local
Local node
Running this command with the parameters
group local
will
return you to the local prompt and local node connectivity.
current
Nodes in current list.
