1016
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C613-50057-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
802.1X C
OMMANDS
DOT
1
X
TIMEOUT
TX
-
PERIOD
dot1x timeout tx-period
Overview
This command sets the transmit timeout for the authentication request on the
specified interface.
The
no
variant of this command resets the transmit timeout period to the default
(30 seconds).
Syntax
dot1x timeout tx-period <
1-65535
>
no dot1x timeout tx-period
Default
The default transmit period for port authentication is 30 seconds.
Mode
Interface Configuration for a static channel, a dynamic (LACP) channel group, or a
switch port.
Usage
Use this command to set the interval between successive attempts to request an
ID.
Examples
To set the transmit timeout period to 5 seconds on interface
port1.0.2
, use the
commands:
awplus#
configure terminal
awplus(config)#
interface port1.0.2
awplus(config-if)#
dot1x timeout tx-period 5
To reset transmit timeout period to the default (30 seconds) on interface
port1.0.2
, use the commands:
awplus#
configure terminal
awplus(config)#
interface port1.0.2
awplus(config-if)#
no dot1x timeout tx-period
Validation
Commands
show dot1x
show dot1x interface
Parameter
Description
<
1-65535
>
Seconds.
