1132
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C613-50057-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
A
UTHENTICATION
C
OMMANDS
SHOW
AUTH
-
WEB
SUPPLICANT
INTERFACE
show auth-web supplicant interface
Overview
This command shows the supplicant (client device) state for the Web
authenticated interface, which may be a static channel (or static aggregator) or a
dynamic (or LACP) channel group or a switch port. This command shows a
summary when the optional
brief
parameter is used.
Syntax
show auth-web supplicant interface <
interface-list
> [brief]
Mode
Privileged Exec
Examples
To display the Web authenticated supplicant on the interface
port1.0.3
, enter
the command:
awplus#
show auth-web supplicant interface port1.0.3
To display brief summary output for the Web authenticated supplicant, enter the
command:
awplus#
show auth-web supplicant brief
Parameter
Description
<interface-list>
The interfaces or ports to configure. An interface-list can be:
•
an interface (e.g.
vlan2
), a switch port (e.g.
port1.0.6
),
a static channel group (e.g.
sa2
) or a dynamic (LACP)
channel group (e.g.
po2
)
•
a continuous range of interfaces, ports, static channel
groups or dynamic (LACP) channel groups separated by a
hyphen; e.g.
vlan2-8
, or
port1.0.1-1.0.4
, or
sa1-2
,
or
po1-2
•
a comma-separated list of the above; e.g.
port1.0.1,port1.0.4-1.0.6
. Do not mix interface
types in a list
The specified interfaces must exist.
brief
Brief summary of the supplicant state.
