264
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C613-50057-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
S
YSTEM
C
ONFIGURATION
AND
M
ONITORING
C
OMMANDS
SHOW
TECH
-
SUPPORT
show tech-support
Overview
This command generates system and debugging information for the device and
saves it to a file. You can optionally limit the command output to display only
information for a given protocol or feature.
The command generates a large amount of output, which is saved to a file in
compressed format. The output file name can be specified by outfile option. If the
output file already exists, a new file name is generated with the current time stamp.
If the output filename does not end with “.gz”, then “.gz” is appended to the
filename. Since output files may be too large for Flash on the device we
recommend saving files to external memory or a TFTP server whenever possible to
avoid device lockup. This method is not likely to be appropriate when running the
working set option of AMF across a range of physically separated devices.
Syntax
show tech-support
{all|[atmf|dhcpsn|epsr|igmp|ip|ipv6|mld|pim|stack|stp|system|t
acacs+]|[outfile <
filename
>]}
Default
Captures
all
information for the device.
Parameter
Description
all
Display full information
atmf
Display ATMF- specific information
dhcpsn
Display DHCP Snooping specific information
epsr
Display EPSR specific information
igmp
Display IGMP specific information
ip
Display IP specific information
ipv6
Display IPv6 specific information
mld
Display MLD specific information
outfile
Output file name
pim
Display PIM related information
stack
Display stacking device information
stp
Display STP specific information
system
Display general system information
Display information
|
Output modifier
>
Output redirection
>>
Output redirection (append)
<
filename
>
Specifies a name for the output file. If no name is specified, this file
will be saved as: tech-support.txt.gz.
