46
1809
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C613-50057-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Ping-Polling
Commands
Introduction
This chapter provides an alphabetical reference for commands used to configure
Ping Polling. For more information, see the
Ping Polling Feature Overview and
Configuration Guide
.
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the
“Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide
.
Command List
•
“
active (ping-polling)
” on page 1811
•
“
clear ping-poll
” on page 1812
•
“
critical-interval
” on page 1813
•
“
debug ping-poll
” on page 1814
Table 46-1: The following table lists the default values when configuring a ping
poll
Default
Value
Critical-interval
1 second
Description
No description
Fail-count
5
Length
32 bytes
Normal-interval
30 seconds
Sample-size
5
Source-ip
The IP address of the interface from which the ping packets are
transmitted
Time-out
1 second
Up-count
30