C613-50057-01 REV A
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
1021
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
802.1X C
OMMANDS
SHOW
DOT
1
X
DIAGNOSTICS
show dot1x diagnostics
Overview
This command shows 802.1X authentication diagnostics for the specified interface
(optional), which may be a static channel (or static aggregator) or a dynamic (or
LACP) channel group or a switch port.
If no interface is specified then authentication diagnostics are shown for all
interfaces.
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the
“Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide
.
Syntax
show dot1x diagnostics [interface <
interface-list
>]
Mode
Privileged Exec
Example
See the sample output below showing 802.1X authentication diagnostics for
port1.0.5
:
awplus#
show dot1x diagnostics interface port1.0.5
Parameter
Description
interface
Specify a port to show.
<interface-list>
The interfaces or ports to configure. An interface-list can be:
•
an interface (e.g.
vlan2
), a switch port (e.g.
port1.0.6
),
a static channel group (e.g.
sa2
) or a dynamic (LACP)
channel group (e.g.
po2
)
•
a continuous range of interfaces, ports, static channel
groups or dynamic (LACP) channel groups separated by a
hyphen; e.g.
vlan2-8
, or
port1.0.1-1.0.4
, or
sa1-2
, or
po1-2
•
a comma-separated list of the above; e.g.
port1.0.1,port1.0.2-1.0.4
. Do not mix interface
types in a list
The specified interfaces must exist.
