C613-50057-01 REV A
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
977
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Q
O
S C
OMMANDS
REMARK
-
MAP
remark-map
Overview
Use this command to configure the remark map. If a re-mark map is applied to a
class, and a policer is also applied to the same class, then:
•
green and yellow traffic will all be acted upon by the remark-map, and
•
red traffic will be either dropped or acted upon by the remark-map,
depending on whether the policer
action
is set to
drop-red
or
remark-transmit
.
The
no
variant of this command resets the remark map to its defaults. Specifying
the bandwidth class is optional. If no bandwidth class is specified, then all
bandwidth classes are reset to their defaults.
Syntax
remark-map [bandwidth-class {green|yellow|red}] to {[new-dscp
<
0-63
>] [new-bandwidth-class {green|yellow|red}]}
no remark-map [bandwidth-class {green|yellow|red}] to
{[new-dscp <
0-63
>] [new-bandwidth-class {green|yellow|red}]}
Mode
Policy Map Class Configuration
Examples
To remark the policed green traffic to a new DSCP of
2
and a new bandwidth class
of
yellow
, use the commands:
awplus#
configure terminal
awplus(config)#
policy-map pmap1
awplus(config-pmap)#
class cmap1
awplus(config-pmap-c)#
remark-map bandwidth-class green to
new-dscp 2 new-bandwidth-class yellow
Parameter
Description
bandwidth-class
Specify the bandwidth class of packets to remark.
green
Remark green packets.
yellow
Remark yellow packets.
red
Remark red packets.
new-dscp
Specify the new DSCP value.
<
0-63
>
The DSCP value.
new-bandwidth-class
Specify the new bandwidth class.
green
Remark the packet green.
yellow
Remark the packet yellow.
red
Remark the packet red.
