Agilent Technologies B1542A, User Manual

Page: 35 / 162

Agilent B1542A User’s Guide, Edition 4 2- 15
Installation
Hardware Installation
Making Measurement Path for Gate (for B1542A-024)
Connect the following accessories as shown in Figure 2-12. And fix the gate
pulse/dc switch unit to the appropriate place. Use a torque wrench and an open-end
wrench to fasten the SMA connectors.
Required accessories:
• BNC(m)-SMA(f) adapter, 1 ea., for pulse generator
• BNC(m)-SMA(f) adapter, precision type, 1 ea., for oscilloscope
• BNC cable, 1 ea.
• SMA cable, 0.3 m, 1 ea.
• SMA cable, 1.5 m, 1 ea.
• Triaxial cable, 1 ea.
Figure 2-12 Measurement Path for Gate
Scope
DC source monitor
Triaxial cable
Pulse generator
to SMU Force
for gate voltage
at DC test
Gate pulse/dc switch unit
SMA cable, 0.3 m
BNC cable
SMA cable, 1.5 m
to input channel
for gate (*2)
Gate Pulse Monitor
SMU
to output channel for gate pulse (*1)
(*1) Use BNC(m)-SMA(f) adapter
for pulse generator.
(*2) Use BNC(m)-SMA(f) adapter
precision type for oscilloscope.
to TRIGGER OUT
to AUX Trig In
Gate Pulse Input