Agilent Technologies B1542A, User Manual

Page: 118 / 162

6- 4 Agilent B1542A User’s Guide, Edition 4
PLSDIV TIS Commands
Table 6-1 Plsdiv Command Summary
Command Summary
PlsdivInit Initializes the pulsed IV test system. Must be executed before any other
Plsdiv command.
PlsdivForceVd Sets the SMU (source monitor unit) output switch on and applies the
specified drain voltage.
PlsdivSetDeviceDelay Sets the device delay time between the gate pulse and the drain pulse.
PlsdivSetAveraging Sets the oscilloscope averaging number for the pulsed IV measurement.
PlsdivSetMeasTime Changes the timing for extracting the pulsed IV measurement data (optional).
PlsdivSetTransTime Changes the pulse transition time of the gate voltage (optional).
PlsdivSetAdjustStat Enables or disables the automatic output adjustment of the specified source.
PlsdivCutoffVd Applies a 0 V drain voltage and sets the SMU output switch off.
PlsdivCutoffVg Sets the PGU (pulse generator unit) output switch off.
PlsdivErrorMessage Returns the error number and error message for the specified status code.
PlsdivSetSampling Sets the oscilloscope sampling rate and sampling number for the pulsed IV
measurement.
PlsdivSetSmoothing Enables or disables smoothing of the specified oscilloscope channel.
PlsdivSetPulseWidth Sets the pulse width of the gate voltage.
PlsdivSetVgLevel Sets the pulse level and polarity of the gate voltage.
PlsdivForceVg Sets the PGU output switch on and starts the gate voltage output.
PlsdivMeasureId Performs the pulsed IV measurement and returns the measurement result.
This performs drain voltage spot measurement and calculates the current
value.
PlsdivCaptureTimeData Reads the oscilloscope horizontal data (time data) after PlsdivMeasureId.
PlsdivCaptureMonData Reads the oscilloscope vertical data (monitor data) after PlsdivMeasureId.
PlsdivUninit Resets the pulsed IV test system.
DispMessage Opens a pop-up window and displays the specified string.