Agilent Technologies B1542A, User Manual

Page: 104 / 162

5- 26 Agilent B1542A User’s Guide, Edition 4
PLSDIV Test Definitions
PLSDIV IV SMU
SMU2 Channel number of the SMU used for the secondary sweep
source. Slot1 to Slot8. Maximum channel number depends on
the configuration of DC source monitor.
StartV2 Secondary sweep start voltage.
-
100 to 100 V, 6 digits or 1
μ
V
resolution.
StopV2 Secondary sweep stop voltage.
-
100 to 100 V, 6 digits or 1
μ
V
resolution.
StepV2 Secondary sweep step voltage.
-
100 to 100 V, 6 digits or 1
μ
V
resolution.
Comp2 Secondary sweep current compliance, in A.
-
100 mA to 100
mA, 6 digits or 1 fA resolution.
Hold Hold time, in s. 0 to 10. 4 digits or 1 ms resolution.
Delay Delay time, in s. 0 to 1. 5 digits or 1 ms resolution.
MeasCh Channel number of the SMU used for the current measurement.
Slot1 to Slot8. Maximum channel number depends on the
configuration of DC source monitor.
RangeMode Current measurement ranging mode. Auto, LimitedAuto, or
Fixed.
MeasRange Current measurement range. 10 pA to 100 mA. 6 digits or 10
pA resolution. Available measurement range depends on the
type of SMU.
ADCType Only for the E5260/E5270 series. Type of A/D converter.
HighSpeed or HighResolution
IntegMode Only for the E5260/E5270 series. Integration mode. Auto,
Manual, or PLC.
IntegNum For E5260/E5270, this parameter is the coefficient used to
define the integration time or the number of averaging samples
for the current measurement. Integer. See Table 5-2.
For 4155/4156, this parameter is the number of averaging
samples if this value is positive, or the NPLC value if this value
is negative. Integer,
-
1023 to 1023. IntegNum=
-
1023 to
-
101
give the same result as IntegNum=
-
100. The NPLC means the
number of power line cycles for the current measurement.