Agilent Technologies B1542A, User Manual

Page: 138 / 162

6- 24 Agilent B1542A User’s Guide, Edition 4
PLSDIV TIS Commands
PlsdivUninit
vg_base Pulse base level, in V. Numeric value,
-
4.5 to 4.5.
polarity Polarity of pulse. Numeric value, 0 (positive) or 1 (negative).
See Figure 6-7.
where, vg_high > vg_base and 55 mV < | vg_high
-
vg_base | < 4.5 V must be
satisfied.
To use the gate voltage automatic adjustment function, set | vg_high
-
vg_base | <
4.0 V.
Figure 6-7 Pulse Level and Polarity
Response Status code. Numeric value. To read the error message, use PlsdivErrorMessage. If
no error is detected by this command execution, 0 is returned.
PlsdivUninit
This command resets the pulsed IV test system (all instruments) and closes GPIB
communication to each instrument.
After executing this command, any Plsdiv commands except for PlsdivInit cannot
be executed. So, make sure to execute PlsdivInit before executing any command.
Filename PlsdivUninit.exe
Response
Status code. Numeric value. To read the error message, use PlsdivErrorMessage. If
no error is detected by this command execution, 0 is returned.
YJBEDVH
YJBKLJK
YJBEDVH
YJBKLJK
3RODULW\ 3RODULW\