Agilent Technologies B1542A, User Manual

Page: 161 / 162

Agilent B1542A User’s Guide, Edition 4 7- 23
Status Code and Error Messages
DVRSCOPE_ERROR_DEVICE_IS_BUSY BFFC0F31 -3889 Device is busy. Reset or reboot the
instrument.
DVRSCOPE_ERROR_DEVICE_NOT_OPENED BFFC0F32 -3890 Device is not ready. Connect the GPIB
cable properly.
DVRSCOPE_ERROR_SELF_TEST_FAILED BFFC0F33 -3891 Selftest failed.
DVRSCOPE_ERROR_SOURCE_NAME BFFC0F40 -3904 Invalid source name. The source name
must be CHANNEL or FUNCTION.
DVRSCOPE_ERROR_CH_NUMBER BFFC0F41 -3905 Channel number must be 1 to 4, or 1
to the number of channels installed.
DVRSCOPE_ERROR_DISP_STAT BFFC0F42 -3906 Display status must be ON or OFF.
DVRSCOPE_ERROR_SWEEP_TIMEOUT
BFFC0F43
-3907 Connect trigger input cable properly
or change timeout value.
DVRSCOPE_ERROR_MARKER_TYPE BFFC0F44 -3908 Marker name must be A or B.
DVRSCOPE_ERROR_MARKER_POS BFFC0F45 -3909 Change time value to display the
marker in this time frame.
DVRSCOPE_ERROR_SAMPLING_RATE BFFC0F46 -3910 Sampling rate must be =< 20 GSa/s.
DVRSCOPE_ERROR_SAMPLING_NUMBER BFFC0F47 -3911 Sampling number must be < 262144.
DVRSCOPE_ERROR_AVERAGING BFFC0F48 -3912 Averaging number must be 1 to 4095.
DVRSCOPE_ERROR_SMOOTHING BFFC0F49 -3913 Smoothing number must be less than
the sampling number.
DVRSCOPE_ERROR_TIME_SCALE BFFC0F4A -3914 Time scale must be 5 ps to 20 s.
DVRSCOPE_ERROR_TIME_OFFSET BFFC0F4B -3915 Horizontal offset value must be
-
4*scale to +4*scale.
DVRSCOPE_ERROR_VSCALE BFFC0F4C -3916 Voltage scale must be 1 mV to 1 V in
1-2-5 step.
DVRSCOPE_ERROR_VOFFSET BFFC0F4D -3917 Change vertical offset to display the
waveform in this screen.
Status Code Name
Status
Code
Error
Number
Error Message