Agilent Technologies B1542A, User Manual

Page: 29 / 162

Agilent B1542A User’s Guide, Edition 4 2- 9
Installation
Hardware Installation
Installing Pulsed IV Test System
The connection overview of the pulsed IV test system (without the option B1542A-
024) is shown in Figure 2-5. To install the system, perform the following steps.
1. “Making Measurement Path for Gate” on page 2-9
2. “Making Measurement Path for Drain” on page 2-10
3. “Connecting RF Probes” on page 2-17 or “Connecting DC Probes” on page 2-18
Making Measurement Path for Gate
Connect the following accessories as shown in Figure 2-7. And fix the divider to the
appropriate place. Use a torque wrench and an open-end wrench to fasten the SMA
connectors.
Required accessories:
• BNC(m)-SMA(f) adapter, 1 ea., for pulse generator
• BNC(m)-SMA(f) adapter, precision type, 1 ea., for oscilloscope
• BNC cable, 1 ea.
• SMA cable, 0.3 m, 1 ea.
• SMA cable, 1.5 m, 1 ea.
• Divider, 1 ea.
Figure 2-7 Measurement Path for Gate
6FRSH
'LYLGHU
60$FDEOHP
WRLQSXWFKDQQHO
IRUJDWH
3XOVHJHQHUDWRU
60$FDEOHP
WRRXWSXWFKDQQHOIRUJDWHSXOVH
8VH%1&P60$IDGDSWHUSUHFLVLRQW\SH
%1&FDEOH
WR75,**(5287
WR$8;7ULJ,Q
8VH%1&P
60$IDGDSWHU