AG-BAG LX1214, Operator'S Manual

Page: 56 / 276

3 - CONTROLS AND INSTRUMENTS
Power port for 12 volt accessories
The power port is located toward the rear of the right side
console switch panel. The power port is used for electrical
accessories such as cell phone chargers. This port has
continuous power whether the ignition is on or off. Pull the
protective cover off to gain access to the port.
This port should not be used for loads over 10 A .
RAIL16GEN0032AA
17
Horn button
The horn button is located on the right side console to
the right of the joystick. Pressing the button activates the
horn. Always sound the horn prior to starting the engine.
RAIL16GEN0037AA
18
Feed table belt control
The feed table belt control (1) is located at the front of the
right side console.
Move the feed table joystick to the left (2) to have the
feed table belt start to move toward the rotor. Pushing the
joystick further to the left will increase the speed of the
belt. The joystick is friction controlled and will maintain
any setting.
Move the joystick back to the center to stop the feed table
belt.
Move the feed table joystick to the right (3) to have the
feed table belt start to move away from the rotor. Pushing
the joystick further to the right will increase the speed of
the belt. The joystick is friction controlled and will maintain
any setting.
Always stop the feed table belt between loads and while
leaving the bagger unattended.
RAIL16GEN0045AA
19
3-18