AG-BAG LX1214, Operator'S Manual

Page: 46 / 276

3 - CONTROLS AND INSTRUMENTS
Switch from trailer or transport mode to bagging mode:
1. Lower the cab end lift jack enough to slightly lift the
wheels.
2. Press the “Align” switch (1) on the switch panel on the
right side corner post.
RAIL16GEN0042AA
15
3. Steer the wheels to 90 degrees ± 2 degrees.
4. Lower the cab end wheels to the ground by lifting the
jack all the way up.
5. Lower the engine end lift jack enough to slightly lift the
wheels.
6. Steer the engine end wheels to 90 degrees ± 2 de-
grees.
7. Lower the engine end wheels to the ground by lifting
the jack all the way up.
8. Press the “Drive” (1) switch on the switch panel on the
right side corner post. Cab end will automatically steer
to match the engine end. If the wheels are more than 5
degrees apart, “In Between Mode”
(2) will be indicated
on the display
RAIL16GEN0042AA
16
RAIL16GEN0043AA
17
9. Press the “Align” (1) switch on the switch panel on
the right side corner post, steer the wheels to within
5 degrees, then press the “Drive”
(2) switch.
RAIL16GEN0042AA
18
3-8