AG-BAG LX1214, Operator'S Manual

Page: 69 / 276

3 - CONTROLS AND INSTRUMENTS
Radio
Antenna
Unfold the antenna for best radio reception. Fold it back
down before driving under low overhead obstructions,
towing or hauling.
AM/FM/WX stereo radio w/CD player
Your vehicle may have a radio without a cd player. To set
any of the programming on that radio, refer to the owner’s
manual that came with your radio.
Setting the clock (radio with cd player).
1. Turn the ignition key on.
2. Press and hold the “dspl/time” button (1) until the hours
and minutes digits flash and you hear a beep. This
indicates you are in the time set mode.
3. Press the “dspl/time” button (1) again until the hours
digits flash.
4. Rotate the “setup” knob (2) to change the hour. Rotat-
ing the knob clockwise will increase the hour; rotating
counterclockwise will decrease the hour.
5. Press the “dspl/time” button (1) again causing the min-
utes digits to flash. Rotate the “setup” knob (2) to
change the minutes. Rotating the knob clockwise will
increase the minutes; rotating counterclockwise will
decrease the minutes.
6. Press the “dspl/time” button (1) again to complete the
time set procedure. The display will return to the de-
fault display.
7. At any time during the time set process, not pressing
a button or rotating the knob for 5 seconds will cancel
the time set mode, return the radio to normal opera-
tion and keep whatever changes you have made. For
setting all other functions of the radio, refer to the op-
erator’s manual supplied with your radio
RAIL16GEN0048AA
1
Programming radio for use in other coun-
tries
All frequencies in North America end in an odd number
such as “9” as in “107.9”. All frequencies outside North
America end in an even number such as “8” as in “101.8”.
These instructions are intended to reprogram the radios
that do not have a cd player.
Setting the radio for North American frequencies.
1. Turn the key switch on and turn the radio off.
2. Press and hold the “dspl/tm set” button (1) until the
hour digit on the time display starts flashing.
3. Immediately press the “band” button (2) once. When
the radio displays “USA”, do not press any buttons until
the radio display returns to the current time.
RAIL16GEN0048AA
2
3-31