AG-BAG LX1214, Operator'S Manual

Page: 134 / 276

6 - WORKING OPERATIONS
Lower and setup feed table
The feed table must be lowered to the ground before the side panels can be setup.
Check to be sure the area in front of the feed table is clear before lowering.
1. Unlock the feed table transport lock (1) . Pull the lock
handle (2) out and rotate into the unlocked position.
To lock the feed table in the upright position the lock
handle must be rotated out of the groove
(3) to allow
the spring to keep the lock engaged.
RAIL16GEN0122AA
1
2. Using the feed table raise/lower switch (1) on the right
side console in the cab, lower the feed table (2) to
the ground. Release the switch when the feed table
reaches the ground.
RAIL16GEN0028AA
2
RAIL16GEN0123AA
3
6-28