AG-BAG LX1214, Operator'S Manual

Page: 70 / 276

3 - CONTROLS AND INSTRUMENTS
Setting the radio for frequencies outside of North America
1. Turn the key switch on and turn the radio off.
2. Press and hold the “dspl/tm set” button (1) for two sec-
onds to enter the “set” mode. While in this mode, push
the “band” button
(2) to display the region or country
desired. The “band” button must be pushed quickly.
NOTE: Once “ARGENTINA” is reached, the display will
start over. Due to government regulations, Saudi Arabia
is not available.
If you have a radio with a cd player, this radio can not be
reprogrammed for frequencies outside of North America.
RAIL16GEN0048AA
3
Two way radio coax cable
The cab is equipped with a two way radio coax cable. The
radio end of the coax cable
(1) is located in the lower right
rear corner of the cab near the fuse block (2) .
Remove the plastic tie wrap and pull the required amount
of cable out of the corner of the cab. Use this coax cable
end for two way radio installation. Remove the plug
(3)
from the outside center of the cab roof and assemble the
antenna to the coax cable at that location by turning the
antenna on to the connector.
RAIL16GEN0046AA
4
RAIL16GEN0047AA
5
3-32