AG-BAG LX1214, Operator'S Manual

Page: 148 / 276

6 - WORKING OPERATIONS
If not cleared:
The feed table will stop after 4 seconds.
The engine will start to decelerate after 8 seconds from
the time the operator leaves the seat.
The HPTO clutch will disengage and the rotor and lower
beater will stop after 10 seconds from the time the opera-
tor leaves the seat.
If this happens the operator will have to restart the rotor
and feed table once the operator is seated in the operators
seat.
5. Start the feed table by moving the controller (1) on the
right side console in the desired direction either away
from the rotor or toward the rotor. Moving the controller
farther from center will increase the speed of the feed
table.
RAIL16GEN0045AA
6
6. Start the upper beater in a clockwise or counter-clock-
wise direction by activating the upper beater switch (1)
in the appropriate direction.
RAIL16GEN0027AA
7
6-42