AG-BAG LX1214, Operator'S Manual

Page: 12 / 276

1 - GENERAL INFORMATION
Note to the owner
This manual contains important information about the
safe operation, adjustment and routine maintenance of
your machine. The manual is divided into ten chapters
as outlined in the table of contents. Refer to the index at
the end of this manual for locating specific items about
your machine.
Do NOT operate or permit anyone to operate or service
this machine until you or the other persons have read this
manual. Use only trained operators who have demon-
strated the ability to operate and service this machine
correctly and safely. All persons who will be operating
this machine shall possess a valid operating permit and/or
other applicable local required permits.
This Operator’s Manual is to be stored in the vehicle.
Make sure this manual is in good condition. Contact your
dealer to obtain additional manuals. Contact your dealer
for any further information or assistance about your ma-
chine. Your dealer has approved service parts. Your
dealer has technicians with special training that know the
best methods of repair and maintenance for your ma-
chine.
Make sure the machine is calibrated before being placed
in service and at regular intervals thereafter in accordance
with procedures outlined in this manual and in the control
system manual. It is the operator’s responsibility to keep
the system properly calibrated and in good working order
at all times.
Make sure the machine is maintained to preserve and/or
improve safety, accuracy and reliability of the system.
Read and follow the maintenance schedule in this man-
ual.
As additional technology becomes available, the
owner is responsible for improving the safety, accuracy
and reliability of the applicator.
ATTENTION: The engine on your machine is designed
and built to government emissions standards. Tampering
by dealer, customers, operators and users is strictly pro-
hibited by law. Failure to comply could result in govern-
ment fines, rework charges, invalid warranty, legal action
and possible confiscation of the machine until rework to
original condition is completed. Engine repairs must be
done by a certified technician only.
1-4