AG-BAG LX1214, Operator'S Manual

Page: 132 / 276

6 - WORKING OPERATIONS
5. Lower the cab end lift jack enough to slightly lift the
wheels.
6. Press the “Align” switch (1) on the switch panel on
the right side corner post.
7. Steer the wheels to 90 degrees ± 2 degrees.
8. Lower the cab end wheels to the ground by lifting the
jack all the way up.
9. Lower the engine end lift jack enough to slightly lift
the wheels.
10. Steer the engine end wheels to 90 degrees ± 2 de-
grees.
11. Lower the engine end wheels to the ground by lifting
the jack all the way up.
12. Press the “Drive” switch (2) on the switch panel on
the right side corner post. Cab end wheels will steer
automatically to match the engine end. If the wheels
are more than 5 degrees apart, “In Between Mode”
(3) will be indicated on the display.
13. Press the “Align” switch (1) on the switch panel on
the right side corner post, steer the wheels to within
5 degrees, then press the “Drive” switch. Cab end
wheels will steer automatically to match the engine
end.
RAIL16GEN0042AA
3
RAIL16GEN0043AA
4
NOTE: With the wheels in this mode, the wheels will “crab”
steer (all wheels remain parallel).
14. Mode on the display will switch to Bag Mode (1) .
15. Place the “2 Wheel Drive/4 Wheel Drive” switch (2)
in the 4 wheel drive (3) position (push the lower part
of switch in).
RAIL16GEN0044AA
5
RAIL16GEN0042AA
6
6-26