AG-BAG LX1214, Operator'S Manual

Page: 182 / 276

7 - MAINTENANCE
Lubricate Drain fluid
Cleaning Replace
Tighten Grease
Check Adjust
Maintenance action Page no.
Coolant PH condition
x
7-70
Replacing engine air filters
x
7-50
Brake slack adjusters
x
7-73
Every 400 hours
Replace main hydraulic oil filters
x
7-74
Replace case drain oil filters
x
7-77
Replace fuel filter/water separator
x
7-79
Every 500 hours
Replace clutch oil and filter
x
7-80
Replace feed table planetary oil
x
7-81
Replace main planetary oil and filter
x
7-82
Yearly
Replace feed table planetary oil
x
7-81
Replace main planetary oil and filter
x
7-82
Cab air filters - Replace
x
7-54
Clean engine vent tube
x
7-88
Grease feed table wheel bearings
x
7-89
Check winch oil level
x
7-90
Replace engine coolant filter
x
7-56
Every 750 hours
Check the air intake system
x
7-92
Check engine speeds
x
7-93
Every 1000 hours
Hydraulic oil - Replace
x
7-94
Every 2 years
Engine coolant drain and flush
x
7-95
Replace engine coolant thermostat
x
7-97
Every 1500 hours
Check fuel injector nozzles
x
7-98
Engine serpentine belt tensioner check
x
7-99
Every 2500 hours
Engine valves clearance - check and adjust
x
7-100
After the first 10 hours.
Drive belts - check
WARNING
Avoid injury!
Shut off the engine, remove the key, and make sure all machine motion stops before you service the
machine.
Failure to comply could result in death or serious injury.
W1128B
DANGER
Rotating driveline!
Keep all guards and shields in place. Properly maintain and service all guards and shields.
Failure to comply will result in death or serious injury.
D0192A
7-24