ABB DCS550 Series, Manual

Page: 236 / 316

236
Signal and parameter list
3ADW000379R0501 DCS550 Manual e e
Signal / Parameter name
m
in.
ma
x.
def
.
uni
t
61.05 TopBottomCmd (winder control, top / bottom command)
Source for the top (overwind) / bottom (underwind) command:
0 = NotUsed
no action
1 = Top constant 1; top (overwind) , default
2 = Bottom constant 0; bottom (underwind)
3 = WindCtrlWord according to WindCtrlWord (61.16) bit 4
4 = DI1
1= Top (overwind); 0 = bottom (underwind)
5 - 23 see WriteToSpdChain (61.02)
Int. Scaling: 1 == 1 Type: C Volatile: N
No
tUs
e
d
1905B
it
3
To
p
-
61.06 WinderOnCmd (winder control, winder on command)
Source to release / block winder functions:
0 = NotUsed
constant 0; block winder functions
1 = Auto depending on winder logic and winder macro, see WinderMacro (61.01), default
2 = Release constant 1; release winder functions
3 = WindCtrlWord according to WindCtrlWord (61.16) bit 5
4 = DI1
1= release winder functions; 0 = block winder functions
5 - 23 see WriteToSpdChain (61.02)
Int. Scaling: 1 == 1
Type: C Volatile: N
No
tUs
e
d
1905B
it
3
Au
to
-
61.07 TensionOnCmd (winder control, tension on command)
Source to release / block the independent speed controller torque limits - IndepTorqMaxSPC (20.24) and -
IndepTorqMinSPC (20.25) - for tension control:
0 = NotUsed
constant 0; no tension control
1 = Auto depending on winder logic and winder macro, see WinderMacro (61.01), default
2 = Release constant 1; release tension control
3 = WindCtrlWord according to WindCtrlWord (61.16) bit 8
4 = DI1
1= release tension control; 0 = no tension control
5 - 23 see WriteToSpdChain (61.02)
Int. Scaling: 1 == 1
Type: C Volatile: N
No
tUs
e
d
1905B
it
3
Au
to
-
61.08 Unused
top / overwind
bottom / underwind
top / overwind
bottom / underwind