ABB DCS550 Series, Manual

Page: 226 / 316

226
Signal and parameter list
3ADW000379R0501 DCS550 Manual e e
Signal / Parameter name
m
in.
ma
x.
def
.
uni
t
40.16 PID OutMin (PID controller minimum limit output value)
Minimum limit of the PID controller output value in percent of the used PID controller input.
Int. Scaling: 100 == 1 % Type: SI
Volatile: N
-325 0 -100 %
40.17 PID OutMax (PID controller maximum limit output value)
Maximum limit of the PID controller output value in percent of the used PID controller input.
Int. Scaling: 100 == 1 % Type: SI
Volatile: N
0 325 100 %
40.18 PID OutDest (PID controller destination of output value)
Index pointer to the sink for the PID controller output value. The format is -xxyy, with: - = negate output value,
xx = group and yy = index.
As default, nothing is connected to the output.
Int. Scaling: 1 == 1 Type: SI
Volatile: N
-9999 9999 0 -
40.19 PID ResetIndex (PID controller reset index)
The PID controller reset and hold can be controlled by a selectable bit - see PID ResetBitNo (40.20) - of the
source (signal/parameter) selected with this parameter. The format is -xxyy, with: - = invert reset signal, xx =
group and yy = index.
Examples:
−
If PID ResetIndex (40.19) = 701 (main control word) and PID ResetBitNo (40.20) = 12 then the PID
controller reset is active when bit 12 is high.
−
If PID ResetIndex (40.19) = -701 (main control word) and PID ResetBitNo (40.20) = 12 then the PID
controller reset is active when bit 12 is low.
Int. Scaling: 1 == 1 Type: SI Volatile: N
-9999 9999 0 -
40.20 PID ResetBitNo (PID controller reset bit number)
Bit number of the signal/parameter selected with PID ResetIndex (40.19).
Int. Scaling: 1 == 1
Type: I Volatile: N
0 15 0 -
40.21 Unused
40.22 PID OutScale (PID controller output scaling)
PID output scaling before PID Out (3.09).
Int. Scaling: 100 == 1
Type: I Volatile: N
0.
05
6 1 -
40.23 PID ReleaseCmd (PID controller release command)
Source to release / block the PID controller:
0 = NotUsed
constant 0; block PID controller
1 = Auto depending on winder logic and winder macro, see WinderMacro (61.01), default
2 = Release constant 1; release PID controller
3 = WindCtrlWord according to WindCtrlWord (61.16) bit 6
4 = DI1
1= release; 0 = block PID controller
5 = DI2 1= release; 0 = block PID controller
6 = DI3 1= release; 0 = block PID controller
7 = DI4 1= release; 0 = block PID controller
8 = DI5 1= release; 0 = block PID controller
9 = DI6 1= release; 0 = block PID controller
10 = DI7 1= release; 0 = block PID controller
11 = DI8 1= release; 0 = block PID controller
12= DI9 1= release; 0 = block PID controller; only available with digital extension board
13 = DI10 1= release; 0 = block PID controller; only available with digital extension board
14 = DI11 1= release; 0 = block PID controller; only available with digital extension board
15 = MCW Bit11 1= release; 0 = block PID controller; MainCtrlWord (7.01) bit 11
16 = MCW Bit12 1= release; 0 = block PID controller; MainCtrlWord (7.01) bit 12
17 = MCW Bit13 1= release; 0 = block PID controller; MainCtrlWord (7.01) bit 13
18 = MCW Bit14 1= release; 0 = block PID controller; MainCtrlWord (7.01) bit 14
19 = MCW Bit15 1= release; 0 = block PID controller; MainCtrlWord (7.01) bit 15
20 = 19.05Bit0 1= release; 0 = block PID controller; Data5 (19.05) bit 0
21 = 19.05Bit1 1= release; 0 = block PID controller; Data5 (19.05) bit 1
22 = 19.05Bit2 1= release; 0 = block PID controller; Data5 (19.05) bit 2
23 = 19.05Bit3 1= release; 0 = block PID controller; Data5 (19.05) bit 3
Int. Scaling: 1 == 1 Type: I Volatile: N
No
tUs
e
d
1905B
it
3
Au
to
-