934
18 TYPE CONVERSION FUNCTIONS
18.29 Converting DINT to BCD
■
Operation result
1.
Function without EN/ENO
The following table lists the operation results.
2.
Function with EN/ENO
The following table lists the execution conditions and operation results.
*1 When FALSE is output from ENO, data output from (d) is undefined. In that case, modify a program so that the data output from (d) is
not used.
Operation error
• When (d) is WORD
• When (d) is DWORD
Operation result
(d)
No operation error occurred
Operation output value
An operation error occurred
Indefinite value
Execution condition
Operation result
EN
ENO
(d)
TRUE (Executes operation)
TRUE (Operation error did not occur)
Operation output value
FALSE (Operation error occurred)
Indefinite value
FALSE (Stops operation)
FALSE
Indefinite value
Error code
(SD0/SD8067)
Description
3401H
The 32-bit signed binary data in the device specified by (s) is out of the valid range (-32768 to 32767).
Data in the device specified by (s) is out of the valid range (0 to 9999).
Error code
(SD0/SD8067)
Description
3401H
Data in the device specified by (s) is out of the valid range (0 to 99999999).
Summary of Contents for MELSEC iQ-F FX5
