8 APPLICATION INSTRUCTION
8.13 Special Timer Instruction
577
8
Processing details
• This instruction measures the period of time to press and hold the command input (pushbutton switch) in 1-second units,
multiplies the measured value by the magnification (10
s
) which is specified by (s), and stores it in the device specified by
(d).
• The table below shows the actual value indicated by (d) depending on the magnification specified by (s) and the pressing
and holding time
0.
Precautions
• When the command contact turns from on to off, the current value (d)+1 of the pressing and holding time is cleared, and the
teaching time (d) will not change any more.
• Two devices are occupied from a device specified as the teaching time (d). Make sure that such devices are not used in
other controls for the machine.
Operation error
(s)
Magnification
(d)
K0
0
(d)
1
K1
10
0
(d)
10
K2
100
0
(d)
100
Error code
(SD0/SD8067)
Description
2820H
The device range specified by (d) exceeds the corresponding device range.
3405H
The value specified by (s) is outside the following range.
0 to 2
0
(d)+1
(d)
(d)+1
(d)
0
Pressing and holding time
Pressing and holding time
Execution
command
Summary of Contents for MELSEC iQ-F FX5
