12 NETWORK COMMON INSTRUCTION
12.1 Link Dedicated Instructions
781
12
Writing data to another station programmable controller (with
notification)
GP.SWRITE
This instruction writes data to the device in another station programmable controller. (In units of words)
After the data writing is completed by the GP.SWRITE instruction, the device of the other station is turned on. The other
station can recognize that data has been written by the GP.SWRITE instruction.
Setting data
■
Descriptions, ranges, and data types
*1 In the case of the ST language and the FBD/LD language, U displays as Un.
*2 The continuous area specified by the write data length (s1)+9 is required.
*3 For the specifications of the string data to be specified, refer to the following.
(
Page 767 Specifications of character string data specified by link dedicated instructions)
■
Applicable devices
Ladder diagram
Structured text
ENO:=GP_SWRITE(EN,Un,s1,s2,d1,d2,d3);
FBD/LD
("GP_SWRITE" enters
.)
Operand
Description
Range
Data type
Data type (label)
(U)
Position number of the module connected
1H to 10H
16-bit unsigned binary
ANY16
(s1)
Own station head device where control data is stored
Refer to
Device name
ANY16
(s2)
Own station head device where the data to be written is
stored
Device name
ANY16
(d1)
Target station head device where data is to be written
Character string
ANYSTRING_SINGL
E
(d2)
Own station device to be turned on for one scan when the
instruction completes.
(d2)+1 also turns on when the instruction completes with
an error.
Bit
ANYBIT_ARRAY
(Number of elements:
2)
(d3)
Target station device to be turned on for one scan when
the instruction completes (enabling the target station to
recognize that data has been written from another station)
Character string
ANYSTRING_SINGL
E
EN
Execution condition
Bit
BOOL
ENO
Execution result
Bit
BOOL
Operand
Bit
Word
Double word Indirect
specification
Constant
Others
(U)
X, Y, M, L, SM,
F, B, SB, S
T, ST, C, D, W,
SD, SW, R
U
\G
Z
LC
LZ
K, H
E
$
(U)
(s1)
(s2)
(s1) (s2) (d1) (d2) (d3)
(U)
EN
ENO
d2
Un
s1
s2
d1
d3
Summary of Contents for MELSEC iQ-F FX5
