86
4 MODULE SPECIFIC INSTRUCTION
4.3 High-speed Counter Instruction
4.3
High-speed Counter Instruction
High-speed processing instruction
■
Setting 32-bit data comparison
■
Reset 32-bit data comparison
■
Comparison of 32-bit data band
■
Start/stop of the 16-bit/32-bit data high-speed I/O function
High-speed current value transfer instruction
■
High-speed current value transfer of 16-bit/32-bit data
Instruction symbol
Description
Reference
DHSCS
Turns ON the bit device of (d) when the current value of the high-speed counter of CH specified by
(s2) is changed to the value specified by (s1).
Instruction symbol
Description
Reference
DHSCR
Turns OFF the bit device of (d) when the current value of the high-speed counter of CH specified
by (s2) is changed to the value specified by (s1).
Instruction symbol
Description
Reference
DHSZ
Compares whether the current value of the high-speed counter is within or outside the value range
specified by (s1) or (s2).
Instruction symbol
Description
Reference
HIOEN
Start or stop high-speed I/O for the specified CH.
HIOENP
DHIOEN
DHIOENP
Instruction symbol
Description
Reference
HCMOV
Transfers the current value of the high-speed I/O.
HCMOVP
DHCMOV
DHCMOVP
Summary of Contents for MELSEC iQ-F FX5
