8 APPLICATION INSTRUCTION
8.17 Pulse Related Instruction
595
8
Precautions
• The maximum input frequency of turning the inputs ON and OFF is shown below:
• When the DSPD instruction is used, the UP/DOWN pulse input, preset input and enable input operate in accordance with
the contents set by the parameters of the high-speed counter.
• When the measurement time is changed while the DSPD instruction is executed, the changed time is applied every time
the measurement time ends.
• When the current value of the high-speed counter is overwritten, a preset input is executed, or the high-speed counter is
reset by the DHCMOV instruction while the SPD instruction is executed, the operation continues, but the pulse density
cannot be measured normally.
• When the DSPD instruction is used, pulses per unit time which exceeds the ring length of the high-speed counter cannot be
input.
• The measurement time specified by (s2) overwrites the value stored in the SD device specified for the measurement unit
time.
• When the measurement time specified by (s2) is outside the range from 1 to 2147483647, the specified measurement time
is rounded into “1” with the sign.
Operation error
FX5U-32M
/FX5UC-32M
CPU module
Used input number
Maximum input frequency
X0 to X5
200 kHz
X6, X7
10 kHz
FX5U-64M
/FX5U-80M
/FX5UC-64M
/FX5UC-96M
CPU module
Used input number
Maximum input frequency
X0 to X7
200 kHz
X10 to X17
10 kHz
Error code
(SD0/SD8067)
Description
3600H
The channel number or device number in which parameters are not set in (s1) is specified.
3405H
An unavailable bit device is set in (s1).
A channel number other than 1 to 8 is specified in (s1).
When FX3 compatible function of a high-speed counter is valid and a channel number is specified to (s1).
1810H
The input specified in (s1) is already used by another instruction.
Summary of Contents for MELSEC iQ-F FX5
