![background image](http://html.mh-extra.com/html/mitsubishi-electric/melsec-iq-f-fx5/melsec-iq-f-fx5_programming-manual_239114574.webp)
572
8 APPLICATION INSTRUCTION
8.12 Data Control Instruction
*1 When coordinates are specified using three points as shown in the points 4, 5 and 6, the output value can be set to an intermediate
value.
In this example, the output value (intermediate value) is specified by the Y coordinate of the point 5.
Even if the X coordinate is the same at three points or more, the value at the second point is output.
*2 When coordinates are specified using two points as shown in the points 8 and 9, the output value is the Y coordinate at the next point.
In this example, the output value is specified by the Y coordinate of the point 9.
Operation error
Setting item
Setting device and setting contents
Remarks
When R0 is specified in (s2)
Setting details
Number of coordinate points
(s2)
R0
K10
X coordinate
Point 1
(s2)+1
R1
K5
Point 2
(s2)+2
R2
K20
Point 3
(s2)+3
R3
K50
Point 4
(s2)+4
R4
K200
Refer to
Point 5
(s2)+5
R5
K200
Point 6
(s2)+6
R6
K200
Point 7
(s2)+7
R7
K250
Point 8
(s2)+8
R8
K350
Refer to
Point 9
(s2)+9
R9
K350
Point 10
(s2)+10
R10
K400
Y coordinate
Point 1
(s2)+11
R11
K7
Point 2
(s2)+12
R12
K30
Point 3
(s2)+13
R13
K100
Point 4
(s2)+14
R14
K25
Refer to
Point 5
(s2)+15
R15
K70
Point 6
(s2)+16
R16
K250
Point 7
(s2)+17
R17
K90
Point 8
(s2)+18
R18
K90
Refer to
Point 9
(s2)+19
R19
K30
Point 10
(s2)+20
R20
K7
Error code
(SD0/SD8067)
Description
3405H
The Xn data is not set in the ascending order in the data table.
However, the instructions before the occurrence of an error are executed.
The input value specified by (s1) is out of the range for the set scaling conversion data.
The value in the middle of operation exceeds the 32-bit data range.
In this case, verify that the distance between points is not "65535" or more.
If the distance is "65535" or more, reduce the distance between points.
The number of coordinate points from the device specified by (s2) is 0 or less.
Summary of Contents for MELSEC iQ-F FX5
