8 APPLICATION INSTRUCTION
8.8 Character String Operation Instruction
469
8
• When (s2)+1 (the number of characters to be extracted) is "-1", the entire character string stored in (s1) and later is stored
to (d) and later.
Precautions
When handling character codes other than ASCII codes, note the following points:
• The number of characters is handled in byte units (8 bits). Accordingly, in the case of character codes in which 2 bytes
express 1 character such as shift JIS codes, 1 character is detected as "2".
• When extracting characters from a character string including character codes in which 2 bytes express 1 character such as
shift JIS codes, consider the number of characters to be extracted in units of character codes for 1 character. Note that the
expected character code is not retrieved if only 1 byte is extracted out of a 2-byte character code.
Operation error
Error code
(SD0/SD8067)
Description
2820H
In the corresponding device range of the device specified by (s1) and later, "00H" does not exist.
The device specified by (d) exceeds the corresponding device range.
3405H
The value stored in a device specified in (s2)+1 is -2 or lower.
The value stored in a device specified in (s2) exceeds the number of characters of (d).
The value stored in a device specified in (s2)+1 exceeds the number of characters of (s1).
The character string specified by (s1) has more than 16383 characters.
The character string specified by (d) has more than 16383 characters.
30H (0)
31H (1)
32H (2)
33H (3)
34H (4)
35H (5)
0000H
b15
b0
b7
b8
(s1)
(s1)+1
(s1)+2
(s1)+3
(s2)
(s2)+1
"012345"
"ABCDEFGHIJK"
"A012345HIJK"
2
-1
41H (A)
42H (B)
43H (C)
44H (D)
45H (E)
46H (F)
47H (G)
48H (H)
49H (I)
4AH (J)
4BH (K)
00H
b15
b0
b7
b8
b15
b0
b7
b8
(d)
(d)+1
(d)+2
(d)+3
(d)+4
(d)+5
41H (A)
30H (0)
31H (1)
32H (2)
33H (3)
34H (4)
35H (5)
48H (H)
49H (I)
4AH (J)
4BH (K)
00H
(d)
(d)+1
(d)+2
(d)+3
(d)+4
(d)+5
Before execution
After execution
Position from the left end in the character
string stored in (d) and later
Number of characters from the left end in the
character string stored in (s1) and later
Summary of Contents for MELSEC iQ-F FX5
