ZyXEL Communications GS1920-48HPv2, Руководство пользователя

Страница: 338 / 432

Chapter 38 ARP Setup
GS1920v2 Series User’s Guide
338
Fig ure 244
IP Application > ARP Setup > ARP Learning
The following table describes the labels in this screen.
Table 163 IP Application > ARP Setup > ARP Learning
LABEL DESC RIPTIO N
Port This field displays the port number.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Changes in this row are copied to all the ports as soon as you make them.
ARP Learning
Mode Select the ARP learning mode the Switch uses on the port.
Select
ARP- Re ply
to have the Switch update the ARP table only with the ARP replies to the ARP
requests sent by the Switch.
Select
G ra tuito us- ARP
to have the Switch update its ARP table with either an ARP reply or a
gratuitous ARP request.
Select
ARP- Re q ue st
to have the Switch update the ARP table with both ARP replies, gratuitous
ARP requests and ARP requests.
Apply Click
Apply
to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the
Sa ve
link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Cancel Click
C a nc e l
to begin configuring this screen afresh.