ZyXEL Communications GS1920-48HPv2, Руководство пользователя

Страница: 217 / 432

Chapter 24 Multicast
GS1920v2 Series User’s Guide
217
24.4.5 MLD Sno o ping - pro xy Filte ring Pro file
Use this screen to create an MLD filtering profile and set the range of the multicast address(es). Click the
Filte ring Pro file
link in the
Adva nc e d Applic a tio n > Multic a st > IPv6 Multic a st > MLD Sno o ping - pro xy >
Filte ring
screen to display the screen as shown.
Fig ure 156
Advanced Application > Multicast > IPv6 Multicast > MLD Snooping-proxy > Filtering >
Filtering Profile
The following table describes the fields in the above screen.
Table 90 Advanced Application > Multicast > IPv6 Multicast > MLD Snooping-proxy > Filtering Profile
LABEL DESC RIPTIO N
Profile Name Enter a descriptive name for the profile for identification purposes.
To configure additional rule(s) for a profile that you have already added, enter the profile
name and specify a different IP multicast address range.
Start Address Type the starting multicast IPv6 address for a range of multicast IPv6 addresses that you want
to belong to the MLD filtering profile.
End Address Type the ending multicast IPv6 address for a range of IPv6 addresses that you want to
belong to the MLD filtering profile.
If you want to add a single multicast IPv6 address, enter it in both the
Sta rt Addre ss
and
End
Addre ss
fields.
Add Click this to create a new entry.
This saves your changes to the Switch’s run-time memory. The Switch loses these changes if it
is turned off or loses power, so use the
Sa ve
link on the top navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Clear Click
C le a r
to reset the fields to the factory defaults.
Profile Name This field displays the descriptive name of the profile.
Start Address This field displays the start of the multicast IPv6 address range.
End Address This field displays the end of the multicast IPv6 address range.