ZyXEL Communications GS1920-48HPv2, Руководство пользователя

Страница: 282 / 432

Chapter 31 Private VLAN
GS1920v2 Series User’s Guide
282
Fig ure 203
Advanced Application > Private VLAN
The following table describes the labels in this screen.
Table 129 Advanced Application > Private VLAN
LABEL DESC RIPTIO N
Active Check this box to enable private VLAN in a VLAN.
Name Enter a descriptive name (up to 32 printable ASCII characters) for identification purposes.
VLAN ID Enter a VLAN ID from 1 to 4094. This is the VLAN to which this rule applies.
Promiscuous Ports Enter the number of the port(s) that can communicate with any ports in the same VLAN. Other
ports belonging to this VLAN will be added to the isolation list and can only send and receive
traffic from the port(s) you specify here.
Add Click
Add
to insert the entry in the summary table below and save your changes to the Switch’s
run-time memory. The Switch loses these changes if it is turned off or loses power, so use the
Sa ve
link on the top navigation panel to save your changes to the non-volatile memory when
you are done configuring.
Cancel Click
C a nc e l
to reset the fields to your previous configuration.
Clear Click
C le a r
to clear the fields to the factory defaults.
Index This is the index number of the rule.
Active This shows whether this rule is activated or not.
Name This is the descriptive name for this rule.
VLAN This is the VLAN to which this rule is applied.
Promiscuous Ports This shows the port(s) that can communicate with any ports in the same VLAN.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Delete Check the rule(s) that you want to remove and then click the
De le te
button.
Cancel Click
C a nc e l
to clear the check boxes.